Saturday, 27 April 2013

film critique

finally we run our film critique, we had 8 films to show

CAN story

Friendship

Iron shoes

MOGs Morgan

SAADET

Shenlin

The wall in the heart

your world, my world

shooting day

Helping tianchi wang A.k.A Tiki shooting his shorting drama.

Image sensor sizes & crop factors prat 1



Shallow DoF is often desirable in order to provide increased emphasis on the primary subject in a scene by defocusing secondary elements. The DoF decreases (becomes shallower) as the lens' focal length is increased and aperture becomes wider (lower f / T stop). The larger the image sensor, the shallower the achieved DoF will be at a given focal length and aperture.











Crop Factor

Lenses designed for use on a 35mm full frame camera project an image onto an area of 36 x 24mm at the focal plane, so when a smaller sensor is used at the focal plane a crop factor is applied because the smaller sensor gives a zoom-in effect. Crop factors for various common sensor sized are illustrated above. As an example: If a 35mm SLR lens lens with a 50mm focal length is used on a camera with a 4/3 sensor then a crop factor of 2 applies and the lens appears to have an effective focal length of 100mm when compared to the same lens in use on a 35mm full-frame camera.

Measurement light

How to Convert Foot-Candle Measurement

A foot-candle is a measurement of light intensity. This is a non SI unit, but it can be easily converted into more useful units of measure if you prefer including Lumens and Watts. By knowing a few simple calculations, it should be much easier to work out exactly what the foot-candle measurement really means.
If your light meter only calculates readings in food-candles, then all is not lost because you should be able to easily work out what this means in different units. The calculations are actually fairly easy to understand and use.

Step 1: Measuring the Light Intensity

The first thing that you need to do is use your light meter to measure the number of foot-candles that there are hitting the subject. Once you have this number, you can then use it to convert it into Lumens or Watts depending on what you want to do. For the case of this example, we will base our calculations on a measurement of 50 foot-candles.

Step 2: Converting to Lumens

One foot-candle is equal to 10.76 Lumens. This means that you need to take your foot-candles measurement and multiply it by 10.76. Using our measurement of 50 foot-candles, we get the following equation: 50 x 10.76. By working out this calculation, you will be able to get 538 lumens. A lumen is the same as Lux and is what many modern light meters will calculate their measurement in.
It's a good idea to write the measurement in Lux down because it's very easy to forget no matter how easy it seems to be to remember it.

Step 3: Converting into Watts

The next thing that you can do is to calculate the number of watts. This is very easy to do once you have converted into watts. One lumen is equal to 0.001496 watts. This means that you simply need to take your answer to step 2 and multiply it by 0.001496. In our example, 538 x 0.001496 equals 0.805 watts per square meter. Write this down again, and you can use it to work out anything you want to know.

Step 4: Doing your own Calculations

Now that you know how to convert foot-candles to lumens (Lux) and Watts. it is easy to do the same for your own measurements. Simply substitute 50 for your own measurements.
  • To work out Lumens or Lux use the following Equation: Lumens = Foot-Candles x 10.76
  • To work out Watts use the following equations: Watts = Lumens x 0.001496
  • You can also calculate the number of watts directly from the foot-candles by combining both equations and using the following: Watts = Foot Candles x 0.01609696 This is because 10.76 x 0.001496 = 0.01609696).
Calculating and converting is very easy and shouldn't take very long to do once you get used to it. As the number of lumens is just over 10 x foot candles, it's also very easy to estimate the lumens calculations in your head.

Storytelling through Composition by Shane Hurlbut part 2


The Dirty OTS (over the shoulder):

This frame is another favorite. It can be used to show characters coming together because they are in love or for a particular cause or set of circumstances.
The person whose shoulder is being shot over is dirty, out of focus in the frame. To do these frames effectively and give your actors room to breathe, I suggest going on a slider, which in this instance we call “The Over Keeper” because you slide to keep your perfect dirty over. Sometimes your actors can lean, move, adjust themselves, and you don’t want to not see the actors’ eyes.

Being obsessed with the subtlety of shot design:

Other times, you can do overs that do not include the actor in the foreground. The director John Stockwell and I did this on Crazy/Beautiful in the beginning and used this style as a vehicle to bring the two together in a subtle way. We did not want Jay Hernandez and Kirsten Dunst to feel like they were together at first, so we shot clean overs. Then as they befriended one another, we started to link them together in wide dirty overs. Jay and Kirsten’s dirty overs became more and more claustrophobic as they fell deeper in love. We visually showed this by slowly narrowing that gap between them until they were literally on top of each other in the dark room scene.

Retrospective:

I have been asked many times by colleagues, “Do you think anyone notices this?” I always turn to them and say, “Not in 30 seconds, but in two hours, I think you will feel it, and that is what being obsessed with the subtle style of filmmaking means to me.”
Narrowing the gap and dirtying OTS shots in Crazy/Beautiful
Narrowing the gap and dirtying OTS shots in Crazy/Beautiful

The Waister:

This shot is like a medium close up; you frame right at the waist. I use this shot to show body language and for a good comedy frame. You can see their stance, their aura.
The Waister

Collar Bone:

I like to use this with women. I think one of the most beautiful areas on a woman’s body is her collar bone because it can show a necklace, the seductive top of cleavage, costumes, fragility, innocence, or just plain beauty. You can show her full head in this shot or bring the top of the frame to just above their eyebrows.
Collar Bone

John Fording Into a Close Up:

Again, this shot comes from the master himself. Ford took his camera all over the place: to mountaintops, secret valleys and isolated caves where a dolly could not be placed at that time. Also remember that the cameras were very heavy and bulky.
John Ford Wide Shots
John Ford Wide Shots
John Ford
John Ford
What Ford liked to do was to play with the actors’ blocking and have them walk into a close up. I have used this on many of my films. Rob Cohen, who directed The Rat Pack and The Skulls, introduced me to this term, “John Fording,” and I have used it ever since. He is one wise and talented filmmaker.

The Choker:

I love this term for an extreme close up. This shot puts you inside the character’s emotions, their thoughts, dreams, struggles, the journey, and their world. It chokes the actor by framing it just below the chin and just above the eyebrow.
The Choker

Color Correction??


Color correction is just one step of the entire filmmaking process…but oh, what a difference it can make. You can take average footage and really make it pop, sing and enhance the viewing experience of your project. If you have excellent footage, then the sky is the limit. You can also make images look garish, ugly and destroy all the hard work the crew did to capture those images on the day of the shoot. The challenges and choices are many and it comes with great responsibility if you are the one applying the Color Correction and Color Grade. In the indie film world, jobs are more often merged and unified and Color Correction is more and more falling into the hands of the Editor. The smaller the budget and tighter the deadline…the more often this becomes true. Shane asked me to take this opportunity and pass on some tips and tricks I have learned over the years of Coloring features, shorts, ads, music videos and documentaries. I choose to use Adobe CS5.5 for my Color post work and bounce between After Effects,Photoshop and Premiere as I love the seamless integration it provides. I am ecstatic to be integrating Speedgrade into my workflow as it will be part of the upcoming CS6 release. That said…the tips I would like to share with you are applicable to all Color Correction software.
To get on the same page, let’s quickly go over some terminology that clarifies what is what in this realm.
COLOR CORRECTION is the process where every clip is manually tweaked to get a good exposure and balance of light. Each clip is adjusted to match color temperature to a predefined choice for each scene. This tedious and mechanical process is essential and in its own way, an art form. The use of SCOPES (Waveform, Vectroscope, Parade) is critical to this step and luckily most NLE’s and Grading software have them built-in. Without them you are literally flying blind and solely trusting your eyes, which have to adjust to room light ambience, fatigue, funky monitors and other factors constantly. Trust the SCOPES and let them guide you into accurate and creative decision making.
COLOR GRADING is the creative process where decisions are made to further enhance or establish a new visual tone to the project through software including: introducing new color themes, re-lighting within a frame, films stock emulations, color gradients and a slew of other choices. Being that this is purely creative, there is no wrong or right…only what the DP, director and colorist feel is appropriate for the story. It can be subtle and invisible or over-the-top and uber-stylized. Therein lies the challenge…The challenge of choices. The tools available are so numerous, powerful and often free (Davinci Resolve Lite!) that you have no excuse not to explore these options further before you embark on the Grading journey.
LIFT-GAMMA-GAIN / SHADOWS-MIDTONES-HILIGHTS / BLACKS-MIDS-WHITES
These are the 3 interchangeable assignments used to describe what portion of the image you will be working with. Every program uses one of the 3 naming conventions above, but in essence they are all the same. Even when working with LEVELS or CURVES, you rely on numericals but still have 3 sliders (at least) to make your adjustments. With these 3 controls, you can mold images almost at will.
There are so many different elements to Color Correction that trying to fit it all into one blog would be futile. I would like to focus on several specific tips that will allow the indie filmmaker to be as effective as possible in creating imagery that will help serve the story. I would like to thank Michael Evanet, the director of “HWY”, for allowing me to share his footage for this blog. I just finished editing and Color Correcting his film.
TIP #1 – SHOOT WITH A FLAT OR LOG PROFILE
Shane has learned over his extensive research and testing of every profile available that choosing a flat profile will allow you to capture as much information as possible into the camera. When I shoot on the 5Dmkii, I like to use Technicolor Cinestyle or Canon Neutral with minimal sharpness and contrast. I’m also about to test the Similaar Flaat profiles that just became available in 4 different flavors. The camera companies often have stock profiles that look contrasty and rich in camera but when analyzed on a monitor, you will have crushed blacks and blown-out highlights. That is information that is gone forever and you cannot get it back. We, as filmmakers with the tools in our hands, cannot accept stock anything! Just as auto anything on the camera is a recipe for disaster, stock profiles are for rank amateurs. Tweak away!
Click the image to view high resolution.
Click the image to view high resolution.
TIP #2 – TRUST THE WAVEFORM, VECTROSCOPE and PARADE SCOPES
In PREMIERE, go to the WINDOW tab and choose WORKSPACE and COLOR CORRECTION. Push the little RGB BUTTON on the bottom right of any window. This will reveal the SCOPES and more.  Waveform=Luminance. Vectroscope=Chrominance. Parade=Red,Green,Blue values. I can’t stress enough how critical and essential it is to use these tools. Once you embrace the SCOPES, you will be confident to plow through footage and have instant visual feedback to confirm you are making the right decisions. I won’t broach the calibrated monitor issue that is always lurking ($$$) and will just say that understanding and trusting the SCOPES will get you 95% of the way home. Grab a Matrox Mini and use that to calibrate any LCD TV if you’re in a pinch. This includes finishing projects for broadcast or passing QC for distribution.  I’ve on-lined 4 indie features on Final Cut Prousing only SCOPES that all passed QC the first time around.  I was sweating bullets…but survived! Adobe makes it even easier for me now.
Click the image to view high resolution.
Click the image to view high resolution.
TIP #3 – ORDER OF OPERATIONS
To maintain image quality and to preserve as much info as possible, it’s important to do things in the proper order.  Just as you wouldn’t ice a cake before you bake it, when you apply an effect is critical.  I have always achieved great results using Stu Maschwitz’s advice. Doing Color Correction on your footage in this order will help you maintain extremely high quality in the interaction of all the effects you use.  Not all steps are needed for every shot but in case you have to use them all, here they are:
1. Remove artifacts and de-noise.
2. Balance your shots by adjusting BLACKS/MIDS/WHITES, SATURATION and WHITE BALANCE.
3. Relight within a shot using power windows or masks.
4. Add gradients, diffusion and other lens filters.
5. Add vignettes
6. Grade your images
7. Simulate a film stock of your choice
8. Resize and sharpen
Click the image to view high resolution.
Click the image to view high resolution.
TIP #4 – THE FAST COLOR CORRECTER EFFECT in PREMIERE is 32 BIT, EASY AND EFFECTIVE
This video effect is a great starting point to tackle any shot. This one effect will allow you in REAL-TIME to address levels, saturation, tinting of the image, white balance and more. The shot below shows how I added contrast by raising the input black slider and lowering the white input slider. I used the color wheel and dragged towards orange to counteract the blue in the original image. You can also use the White Balance dropper to achieve an accurate starting point…but I preferred in this case to Tint the whole image towards orange and approximate a 1950’s film look.  I boosted saturation by a healthy 40% to make the image pop. Finally, a 2.35 matte was added to approximate the old Cinemascope aspect ratio.
Click the image to view high resolution.
Click the image to view high resolution.
TIP #5  -  ADJUST YOUR LIFT/SHADOWS/BLACKS FIRST
By adjusting your BLACKS first, you get a baseline started to balance your image. I like working from the bottom up and getting my BLACKS just kissing 0 IRE on the WAVEFORM. I then push the WHITES up to expand my image and get some contrast into it. Finally, I tweak the MIDS as needed. You will notice that moving the BLACKS or WHITES up or down will affect the entire WAVEFORM so there is a give and take dance as you work back and forth. MIDS do not affect the BLACKS or WHITES too much and that is why you should work with them last. Lastly, if you raise MIDS, you will lose overall saturation to the image, so compensate by bumping up the SATURATION to keep the colors popping.
Click the image to view high resolution.
Click the image to view high resolution.
TIP #6 - MIDS ARE WHERE FACES LIVE
MIDS are where the skin tones live and you can really make a face pop by raising the MIDS after you have a good balanced image. Sometimes it feels easy to raise the EXPOSURE in Premiere or After Effects to brighten a face or scene…but that raises all the levels evenly and will ultimately not be as effective as separately adjusting the 3 zones. A good IRE for a properly exposed face is 60-70 IRE on the WAVEFORM.  If you raise the MIDS too much, you will introduce the beast of digital noise, so use judicially!
Click the image to view high resolution.
Click the image to view high resolution.
TIP #7 - Look for the FLESH LINE on the VECTROSCOPE to see how far off your skin tone is. On the 3-Way Color Corrector effect, or on a plug-in like Colorista, you can change the specific zone of color where the flesh tones live. By adjusting the color of the MIDS wheel you can introduce the proper hues into a face that need tweaking. Move the wheel in the direction of the color you need more of in your face. Watch the section of skin tone move until it lines up with FLESH LINE. An interesting note is that the FLESH LINE is accurate for all races and skin tones. We all share the same skin pigment that registers as numeric FLESH color. Proper WHITE BALANCING earlier will make this a minor but still important adjustment.  If you are going for a natural look, no one likes a pink, red or green face. SATURATION should be dialed in at this point to give a natural look to the flesh tone. Here’s a subtle example of adjusting for skin…and an overt example for comparison.  Neither is right or wrong….it’s all up to what feels right for that moment.
Click the image to view high resolution.
Click the image to view high resolution.
Click the image to view high resolution.
Click the image to view high resolution.

Storytelling through Composition by Shane Hurlbut part 1


Many of you have expressed an interest in composition: what makes a good frame or a bad one. There are a few classic frames that I customize to give them flare. I think this will help all of you find your compositional voice. Remember that the best creative inspiration can come from not always following the rules.

The Basics:


Wide Shot aka Doinker:

This usually is used to educate the audience on place and geography. The establishing shot lets the audience know where everyone is. In my opinion, these frames are underutilized. I like seeing where my characters are, the time and space. It sets the tone, the mood, and it is where all light comes from, all motivation, all conception. This can be used to show the peril that your character is about to face; it can show scope; it can make you cry; it can ground you, create a sense of loneliness, move you, have you just say “WOW!” There is power in a wide shot. I have been spinning film through a camera for about 20 years now, and I still go to movies and drop my jaw with the incredibly talented cameramen/women who bring this art of cinematography to life.
Depending on the film, it can be a helicopter shot, a sweeping crane shot, a slow moving dolly or just a Doinker, which is one of those weird terms. This was introduced to me by McG on We Are Marshall. He kept saying, “We will set the camera up here for the Doinker.” I loved it and have been using the word to describe a locked off shot that “doinks” onto the screen ever since. McG has a passion for the entire process of filmmaking and inspires me creatively with his humor and vision.
Wide shots
Wide shots

The Head to Toe:

This is a shot that takes in the actor’s whole body from their head to their toes. It can be used to educate the audience about time and space, to show body language, show wardrobe, get a laugh, etc.
Head to toe shots
Head to toe shots

The Cowboy:

This is one of my favorite shots, not only for the name, but also for its origin. This shot is a frame of an actor’s body cut off at the knees. The origin of this shot came from John Ford Westerns. He was one talented director. Please look at this man’s frames. They will blow you away.
This shot was what Ford used to show his cowboys. To show a cowboy, you need to show his gun, and the holster fell right at the knee line. This frame is a great comedic frame as well. It can set the stage for a range of emotions: confrontation, camaraderie, fear or love.
John Ford Cowboy
John Ford Cowboy
John Ford Cowboy
John Ford Cowboy
Cowboy shots
Cowboy shots

The Two Shot:

This shot can be very subjective, with a variety of sizes depending on the story you are trying to tell. A two shot can be two bodies in frame, head to toe, cowboy, or a tight two shot with just heads in the frame. I used this intimacy in Deadfall, directed by Stefan Ruzowitzky, which comes out in theaters December 7th. Like Deadfall on Facebook.
In Crazy/Beautiful, the two shot became a very powerful tool in showing intimacy, vulnerability, claustrophic framing. A two shot of just two actors’ heads in profile created this intimacy, this intoxication. That is love. It moves you, makes you do things you never thought you would, which is exactly what director John Stockwell wanted to convey with Kirsten Dunst and Jay Hernandez inCrazy/Beautiful.
Intimate profile shot from Crazy/Beautiful
Intimate profile shot from Crazy/Beautiful

Breaking the Rules:

Kristen Dunst and Jay Hernandez were two people you would never put together as a couple, and that was the magic. Using very unique framing and unorthodox composition, we tried to tell the story of love finding its way. Teenagers – they are unpredictable. I have one, and they can throw you for a loop! I wanted my framing to be like a teenager: off, unpredictable, not perfect, still finding themselves. It was fun to be unconventional with our coverage. John Stockwell was fearless in his cinematic vision. He pushed me creatively. Keep it small, keep it intimate.
Off balance frames from Crazy/Beautiful
Off balance frames from Crazy/Beautiful
Two shots
Two shots